產品說明0
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
B0266，OV9281 單色全局快門 1MPx2 雙鏡頭相機模塊，適用樹莓派、Nvidia（B0263的替代）
1MP*2 OV9281 Global Shutter Monochrome Stereoscopic Camera Bundle Kit For Raspberry Pi, NVIDIA® Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NX
適用於 Raspberry Pi、Nvidia Jetson Nano、Xavier NX、Orin系列（AGX Orin、Orin Nano、Orin NX）、雙 OV9281 單色全局快門相機模塊的 Arducam 1MP*2 立體相機
Package Including:
- 2 pcs 1MP OV9281 global shutter camera module with low distortion M12 lens
- 1 pcs Arducam Camarray stereo camera HAT
- 2 pcs 150mm/6inch 22pin to 22pin camera cables
- 1 pcs 300mm/12inch 15pin to 22pin camera cable
- 1 pcs 73mm/2.87inch 15pin to 22pin camera cable
- 4 pcs M2.5*10mm Nylon Hex Standoffs
- 4 pcs M2.5 Nylon Nuts
- 4 pcs M2.5*6mm Nylon Screws
overview
- Wide Compatibility: Compatible with Raspberry Pi and Jetson Nano/Xavier NX
- Complete Synchronization: The frames of dual cameras is synchronized in hardware level
- Mono Global Shutter: Excellent detail and sensitivity for real-time, higher accuracy and frame rates
Overview:
This Arducam stereo camera bundle kit consists of two synched OV9281 global shutter cameras and an Arducam Camarray stereo camera HAT. As a stereo bundle system, it enables simultaneously working dual cameras with a variable baseline for better prototyping and evaluation with a single MIPI CSI camera slot: The two image sensors are on separated camera boards, and you easily move them around for different perspectives while the Camarray HAT handles the rest of the work. This is helpful for proof-of-concept stages when you may want more flexibilities than what a fixed stereo camera module can offer. You will be able to find the optimal baseline for your application with this bundle, and we welcome you to send us product customization requests after that.
Features:
- Supports Platforms: This bundle runs two synchronous OV9281 cameras through a single connection with MIPI CSI-2 port, compatible with Raspberry Pi and Jetson Nano/Xavier NX, also can be extended to other platforms that have MIPI CSI-2 interface and standard Video4Linux2(V4L2) driver.
支持平台：該捆綁包通過與 MIPI CSI-2 端口的單個連接運行兩個同步 OV9281 攝像頭，兼容 Raspberry Pi 和 Jetson Nano/Xavier NX，還可以擴展到具有 MIPI CSI-2 接口和標準 Video4Linux2 的其他平台（V4L2) 驅動程序。 - Complete Synchronization: The frames of two cameras are synchronized at the hardware level, extra synchronization scheme by time stamping or so does not need to be considered.
完全同步：兩個相機的幀在硬件層面上同步，不需要考慮時間戳等額外的同步方案。 - Mono Global Shutter: Shoot high-speed moving objects in crisp sharp images. Avoid the rolling artifacts to get a much more accurate complete picture than the rolling shutter Pi cameras. Frame Rate: 70fps@1280*2 x 800 on Jetson.
單全局快門：以清晰的圖像拍攝高速移動的物體。避免滾動偽影，以獲得比滾動快門 Pi 相機更準確的完整圖片。幀速率：Jetson 上 70fps@1280*2 x 800。 - Variable Baseline Extension: Compared to the fixed stereo camera module, this stereo camera bundle has higher flexibility. The separated cameras can be used with a variable baseline device and controlled through the computer control system to achieve rapid and dynamic interactive adjustment of the moving parts for human-like multi-degree-of-freedom stereo binocular vision.
- Support Changing Frame Rate: You can change the frame rate from 5fps to 70fps. If the set frame rate exceeds the maximum value, it will work according to the maximum value. The same goes for the minimum value.
支持更改幀速率：您可以將幀速率從 5fps 更改為 70fps。如果設置的幀率超過最大值，則按照最大值工作。最小值也是如此。
Specifications:
| Support Platform | Raspberry Pi and Jetson Nano |
| Output/CSI-2 Speed | x1 CSI-2 2-lane Output Port/1.0 Gbps/Lane |
| ISP Support | Supported on Raspberry Pi,not supported on Nvidia Jetson
（ISP不支持Nvidia Jetson） |
| External Trigger | Support |
| Aggregate mode | Full Spelling Combine |
| Frame Rates(On Raspberry Pi) | RAW8/RAW10: 2560x800@60fps, 2560x720@65fps, 1280x400@150fps |
| Frame Rates(On Nvidia Jetson)* | RAW8/RAW10: 2560x800@60fps, 2560x720@65fps, 1280x400@150fps |
| Image Sensor | Mono Global Shutter OV9281 |
| Pixel Size | 3 μm x 3 μm |
| Active Array Size | 1280 x 800 |
| Optical Size | 1/4” |
| Focus Distance | 30mm-infinite 焦距 |
| Camera Interface | 2-lane MIPI CSI-2 |
| Camera Board Size | 40mm x 40mm 攝像頭模組 |
| Camarray Hat Size | 65mm x 56 mm 擴展板 |
| Default Lens Mount | M12 Mount |
| Distortion | <1% |
| Effective Focal Length | 2.8mm |
| Field of View(FOV) | 70° (H) x 43.75°(V) |
| IR Sensitivity | Without IR-cut filter, sensitive to IR light |
| F.NO | 2.8mm 焦距 |
| Lens Dimension | Φ14×15.6mm |
| Lens Weight | 4g |
| Default Lens | Low distortion M12 lens (Part Number: M27280M07S) |
*: JetPack4.6/L4T32.6.1 on NVIDIA Jetson Nano/Xavier NX
Applications:
- Head, and eye tracking
- Gesture detection
- Motion detection
- 3D reconstruction
- Depth-related vision applications, etc.
