LinkIt ONE 聯發科平台開發板(102030002)
清單：盒子 + 板 + GSM / WFi / GPS 天線 + 電池 + 說明書 + 介面圖
---------------------------------------
其他套餐~
ONE-A. LinkIt ONE主板 + Sidekick Basic Kit零件套餐 =$2840
ONE-B. LinkIt ONE主板 + Grove Starter Kit傳感器套餐 =$3900
ONE-C. Sidekick Basic Kit零件 + Grove Starter Kit傳感器 =$2740
ONE-D. LinkIt ONE主板 + Sidekick Basic Kit零件 + Grove Starter Kit傳感器 = $4740
ONE-E. 書：《用LinkIt ONE玩出物聯網大未來》=$315
ONE-F. LinkIt ONE 主板 + 書《用LinkIt ONE玩出物聯網大未來》=$2315
ONE-G.LinkIt ONE主板 + Sidekick Basic Kit零件 + Grove Starter Kit傳感器 + 書 = $5055
-------------------------------------------
LinkIt ONE 8合1全能單片機開發板GSM/GPRS/WIFI/BLE/GPS/SD
The LinkIt ONE development board is an open source, high performance board for prototyping Wearables and IoT devices. It's based on the world's leading SoC for Wearables, MediaTek Aster (MT2502) combined with high performance Wi-Fi (MT5931) and GPS (MT3332) chipsets to provide you with access to all the features of MediaTek LinkIt. It also provides similar pin-out features to Arduino boards, making it easy for you to connect to various sensors, peripherals, and Arduino shields.
It also provides similar pin-out features to Arduino boards, making it easy for you to connect to various sensors, peripherals, and Groves.
LinkIt ONE is a co-design product by Seeed Studio and MediaTek. It brings together the parties' knowledge in open hardware and industry leading reference designs for Wearables and IoT devices to create this powerful development board.
LinkIt ONE development is fully supported on the MediaTek Labs site: check out the LinkIt section and register here to download the SDK, participate in the Forums, and more.
| Category | Feature | Spec |
| Microcontroller | Chipset | MT2502A (Aster) |
| Core | ARM7 EJ-S™ |
| Clock Speed | 260MHz |
| PCB Size | Dimensions | 3.3 x 2.1 inches |
| Memory | Flash | 16MB |
| RAM | 4MB |
| Power | Battery Jack | 3.7~4.2V Li-battery |
| DC Current Per I/O Pin | 0.3~3mA |
| Digital IO Pins | Pin Count | 16
(D0~D13, SDA, SCL) |
| Voltage | 3.3v |
| Analog Input Pins | Pin Count | 4
(A0, A1, A2) |
| Voltage | 0~5V |
| PWM Output Pins | Pin Count | 2
(D3 and D9) |
| Voltage | 3.3v |
| Max Resolution | 13bit |
| Frequency (Resolution) | 1.6KHz (13bit) |
| 50.8KHz (8bit) |
| 800KHz (4bit) |
| (customizable) |
| External Interrupts | Pin Count | 2
(D2 and D3) |
I2C
(master only) | Set Count | 1
(SDA, SCL) |
| Speed | 100Kbps, 400Kbps, 3.4Mbps |
SPI
(master only) | Set Count | 1
(MOSI, MISO, SCK, SS) |
| Speed | 104Kbps~26Mbps |
| UART | Set Count | 1
(TX/RX) |
| Voltage | 3.3v |
| UART on USB | Set Count | 1 |
| Communications | GSM | 850/900/1800/1900MHz |
| GPRS | Class 12 |
| Bluetooth | BR/EDR/BLE (Dual Mode) |
| Wi-Fi (MT5931) | 802.11 b/g/n |
| Positioning | GPS (MT3332) | GPS/GLONASS/BEIDOU |
| User Storage | Flash | 10MB |
| SD Card | Up to 32GB (Class 10) |
| Executable Size | RAM (Code+RO+RW+ZI+Heap) | 2MB |
Want to know more about the soul of LinkIt ONE? MediaTek Labs provides LinkIt SDK for Arduino, with which you develop Sketches in Arduino IDE that you run on LinkIt ONE. There is a Developer’s Guide that will help you get started with the SDK and LinkIt APIs, as well as an online API reference. And when you come to taking your prototype towards deployment, there is a Hardware Reference Design package containing schematic, layout and datasheets to help you create your own product using Seeed Studio’s Fusion PCBA Service.
To find out more check out the LinkIt section on the MediaTek Labs site and register here or check out the resources below.
--------------------------------------------
http://twarm.com/commerce/product_info.php?products_id=1694
用LinkIt ONE玩出物聯網大未來 (附入門影音教學/全書範例) 作者： 鄧文淵 總監製/文淵閣工作室 編著 出版社：碁峰 出版日期：2015/11/30 ISBN：9789863478560
