產品說明
Description:
The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a clear signal from the PR and QT Intervals easily.
The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement.
The AD8232 Heart Rate Monitor breaks out nine connections from the IC that you can solder pins, wires, or other connectors to. SDN, LO+, LO-, OUTPUT, 3.3V, GND provide essential pins for operating this monitor with an Arduino or other development board. Also provided on this board are RA (Right Arm), LA (Left Arm), and RL (Right Leg) pins to attach and use your own custom sensors. Additionally, there is an LED indicator light that will pulsate to the rhythm of a heart beat. Biomedical Sensor Pads and Sensor Cable are required to use the heart monitor and can be found in the Recommended Products section below.
Note: This product is NOT a medical device and is not intended to be used as such or as an accessory to such nor diagnose or treat any conditions.
Features:
- Operating Voltage - 3.3V
- Analog Output
- Leads-Off Detection
- Shutdown Pin
- LED Indicator
- 3.5mm Jack for Biomedical Pad Connection
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (AD8232)
- GitHub (Design Files & Example Code)
- Product Video
相關資訊
心電測量AD8232 脈搏心臟心電圖套件Arduino兼容Duinofun
Arduino AD8232 (附範例資料)心電測量脈搏心臟 心電圖 心律監測感測器模組套件
注意：此設備不是為了要診斷或治療任何疾病。
單導聯心率監護前端，AD8232 是一款集成前端，適用於對心臟生物電信號進行信號調理來進行心率監護。這是一款針對各類生命體徵監護應用推出的低功耗、單導聯、心率監護儀模擬前端。
下面是AD8232模塊的詳細圖片： 心率測量小板AD8232暴露給用戶9個連接接口，你可以焊接、接線或連接其他連接器。SDN，LO+，LO-，OUTPUT，3.3V，GND這6個接口，提供給Arduino主控板或者其他的開發板必要的操作端口。另外3個接口是RA(右手)，LA(左手)和RL(右腿)引腳，這些引腳可以讓你用你使用不同的測量電極。
規格
AD8232低功耗、單導聯、心率監護儀模擬前端
工作電壓3.3V
(國產)Arduino AD8232 心電測量脈搏心臟 心電圖 心律監測感測器模組套件+UNO板+USB線
http://twarm.com/commerce/product_info.php?products_id=15293
搭配UNO 測試...
