產品說明
※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！
Arducam 12.3MP IMX477 M12攝像機模塊HQ Camera(B0251)，適用Jetson Nano、NX
Arducam MINI High Quality Camera with M12 mount lens for Jetson Nano and Xavier NX, 12.3MP 1/2.3 Inch IMX477 HQ Camera Module
Arducam MINI高品質相機，帶有M12固定鏡頭，適用於Jetson Nano和Xavier NX，12.3MP 1 / 2.3英寸IMX477 HQ相機模塊
〈Package Includes 清單〉：
-
1 pcs 12.3MP IMX477 color camera module
- 1 pcs 3.9mm focal length M12 mount camera lens
- 1 pcs 150mm/12inch 15pin to 22pin camera cable
＊影片1（Mini HQ Camera Module & M12 Lens for Nano & NX Tutorial）：https://youtu.be/BgOy4Q_3X4A
＊影片２（Troubleshooting IMX477 Camera with Nano & NX (Hardware & Driver)）：https://youtu.be/5R4Qcwj8uto
＊影片３（Pi HQ Camera Module in V2 Size: Mini IMX477 for Jetson Nano & NX Dev Kit）：https://youtu.be/b78TIIlA3WI
To make High Quality camera module work on applications with size and weight limits, Arducam just released this small size camera module for Jetson Nano/Xavier NX. It is fully compatible with Raspberry Pi V2 module size, a 24mm x 25mm IMX477 camera board, a low distortion M12 mount lens. You can use this camera module on Jetson Nano/Xavier NX natively with ISP features, and no need for any driver or hardware update.
為了使高質量的攝像頭模塊在尺寸和重量受到限制的應用中正常工作，Arducam剛剛為Jetson Nano / Xavier NX發布了這種小型攝像頭模塊。它與Raspberry Pi V2模塊尺寸，24mm x 25mm IMX477相機板，低失真M12安裝鏡頭完全兼容。您可以在具有ISP功能的Jetson Nano / Xavier NX上使用此相機模塊，而無需任何驅動程序或硬件更新。
＜Specifications 規格＞
『Camera 攝像頭』
- – Sensor: IMX477／＊傳感器：IMX477
- – Optical Format: 1/2.3″ (diagonal 7.857mm)／＊光學格式：1 / 2.3“（對角線7.857mm）
- – Resolution: 4056(H) x 3040(V) 12.3MP／＊分辨率：4056（H）x 3040（V）12.3MP
- – Pixel Size: 1.55um x 1.55um／＊像素大小：1.55um x 1.55um
- – IR Sensitivity: Visible light／＊紅外靈敏度：可見光
- – Interface: 2-lane MIPI CSI-2／＊接口： 2通道MIPI CSI-2
- – Default Lens Mount: M12 Mount／＊默認鏡頭安裝：M12安裝
- – Frame Rate: (depends on the target platform, maximum fps limit might apply)／＊幀頻：（取決於目標平台，最大fps限制可能適用）
- 1920×1080 @ 60fps、4032×3040 @ 30fps
- – Format: 1/2.3 inch／＊格式：1 / 2.3英寸
- – Focal Length: 3.9mm／＊焦距：3.9mm
- – Aperture (F): F2.8／＊孔徑（F）：F2.8
- – Field of View (FOV): 80° (H)／＊視場角（FOV）：80°（H）
- – Mount: M12 Mount／＊安裝：M12安裝
- – Back Focal Length: 4.49mm／＊後焦距：4.49mm
- – MOD: 0.1m Dimension: Φ14×18.67mm／尺寸
- – Weight: 5g／重量
『Camera board 模組尺寸』– Board Size: 24mm×25mm
相關文件
Documentation
https://www.arducam.com/docs/camera-for-jetson-nano/imx477/
