※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！

Arducam M12 Lens Set 鏡頭組(LK001)，適用Arduino、Raspberry Pi相機鏡頭，遠攝，微距，廣角，魚眼鏡頭套件（10°-200°）

Arducam M12 mount camera lens kit for Arduino and Raspberry Pi camera
  適用於Arduino和Raspberry Pi相機的Arducam M12安裝相機鏡頭套件

Arducam M12 Lens Set, Arducam Lens for Raspberry Pi Camera (1/4") and Arduino, Telephoto, Macro, Wide Angle, Fisheye Lens Kit (10°- 200°) with M12 Lens Holder and Cleaning Cloth, Optical All-in-One

Arducam M12鏡頭組，用於Raspberry Pi相機（1/4“）和Arduino的Arducam鏡頭，遠攝，微距，廣角，魚眼鏡頭套件（10°-200°），帶有M12鏡頭架和清潔布，光學多合一一

安裝影片：https://youtu.be/23jE0l8PTKA

Package Including:

• 1pcs Arducam M12 mount camera lens kit

• 10 M12 Mount lens for Arduino and Raspberry Pi cameras, HFOV ranging from 10 to 200 degree
  10 M12固定鏡頭，用於Arduino和Raspberry Pi相機，HFOV範圍從10到200度
• Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is – we selected, tested and labeled a bunch of lenses and shrinks it all into a complete toolbox on your palm
  我們為什麼需要它：以防萬一您對固定的官方相機感到失望，並希望精確控制進入圖像幀的內容（例如圖像的寬度和距離），我們選擇，測試並標記了一堆鏡頭和將所有內容縮小到掌上一個完整的工具箱中
• What’s in it: This kit includes 10 M12 Lenses to cover almost any angles of view you’ll ever need, 10°/20°/40°/60°/80°/100°/120°/140°/160°/200° respectively on a 1/4” Pi Camera like OV5647 and IMX219. M12 lens holders, screws, specifications and even cleaning cloth are also in the box
  內容：此套件包含10個M12鏡頭，可覆蓋您幾乎需要的任何視角，例如10°/ 20°/ 40°/ 60°/ 80°/ 100°/ 120°/ 140°/ 160°/在1/4英寸Pi相機（例如OV5647和IMX219）上分別為200° 包裝盒中還包含M12鏡頭支架，螺釘，規格甚至清潔布
• What else is needed: It makes a perfect combo with “Arducam B0031”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this kit directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
  還需要什麼：它可以與“ Arducam B0031”完美結合，這是用於Raspberry Pi的更靈活，體積稍大的相機模塊，它使用M12鏡頭構築最佳圖像。您不能直接在官方的Raspberry Pi相機模塊V2上使用此套件，因為需要M12支架或相機板的孔間距為18 / 20mm
• How to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera. Replace it with the next if it is not the best. Video: youtu.be/23jE0l8PTKA
  使用方法：拿一個帶M12鏡頭架的相機，然後將一個鏡頭慢慢擰入M12鏡頭架，直到在視頻屏幕上看到清晰清晰的圖像為止。如果要拍攝靠近相機的物體，請將其旋出一點。如果不是最好的話，請用下一個替換。視頻：youtu.be/23jE0l8PTKA
• NOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights. Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all. Arducam CS Mount Cameras also work with this kit with holders replaced
  注意：隨附的4個鏡架的孔距為18mm / 20mm，高度為7mm / 13mm。通常，具有較大視場的鏡頭需要較短的鏡架，這意味著如果鏡頭根本無法對焦，則需要更換鏡架。Arducam CS固定相機也可與此套件一起使用，但更換了支架

 Overview

• 10 M12 Mount lens for your Arduino and Raspberry Pi cameras, HFOV ranging from 10 to 200 degree
  適用於Arduino和Raspberry Pi相機的10 M12固定鏡頭，HFOV範圍從10到200度
  
• Compatible with Arducam cameras with M12  Mount, B0067, B0068, B0031 recommended
  兼容Arducam相機，帶有M12支架，建議使用B0067，B0068和B0031
  
• Selected and tested lenses with labeled caps, much easier for you to select the best lens you need
  選定並經過測試的帶有加蓋標籤的鏡頭，讓您輕鬆選擇所需的最佳鏡頭
  
• 4 M12 lens holders with 18mm and 20mm hole spacing, 2 heights in metal and plastic
  選定並經過測試的帶有加蓋標籤的鏡頭，讓您輕鬆選擇所需的最佳鏡頭
  
• Screws, specifications, and instructions for changing lens provided. Video: youtu.be/23jE0l8PTKA
  提供螺絲，規格和更換鏡頭的說明。視頻：youtu.be/23jE0l8PTKA