Smart-link V9 ARM仿真器
* USB 2.0接口；
* 支持任何ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4, Cortex-R4, RX100 / RX200 / RX610 / RX621 / RX62N/ RX62T / RX630 / RX631 / RX63N
* Cortex M3 support, including JTAG, SWD and SWV
* 下載速度達到1M byte/s;
* 與IAR Workbench可無縫集成；
* 通過USB供電，無需外接電源；
* JTAG最大時鐘達到15M；
* 自動內核識別；
* 自動速度識別；
* 支持自適應時鐘；
* 所有JTAG信號能被監控，目標板電壓能被偵測；
* 支持JTAG鏈上多個設備的調試；
* 完全即插即用；
* 20Pin標準JTAG連接器；
* 寬目標板電壓範圍：1.2V-5.0V；
* 多核調試；
* 包括軟件：J-Mem,可查詢可修改內存；
* 包括Smart-Link Server:
* 標配Smart-Flash,支持獨立的Flash編程，可以作為量產解決方案；
* 標配RDI插件使Smart-Link適合任何RDI兼容的調試器如IAR、ADS、Relview和Keil等；
* 標配RDI Flash BP，可以實現在RDI下，在Flash中設置無限斷點；
* 標配RDI Flash DLL,可以實現在RDI下的對Flash的獨立編程；
* 標配GDB server，可以實現在GDB環境下的調試。
* 全功能版本具備RDI,FLASHDL,FLASHBP,Smart-FLASH ARM,GDB License.
配件清單︰
1、Smart-LINK V9仿真器 1 台
2、USB線 1 條
3、20PIN 優質連接線 1條
4、光盤 1張
本產品三年保修.
JTAG/SWD Emulator with USB interface
Smart-Linkis a USB powered JTAG emulator supporting a large number of CPU cores.
Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. Smart-Link is used around the world in tens of thousand places for development and production (flash programming) purposes.
smart-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
Including all models, more than 100,000 smart-Links have been sold so far, making smart-Link probably the most popular emulator for ARM cores and the de-facto standard.
Features
- Direct download into flash memoryof most popular microcontrollers supported
- Supported CPUs: Any ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4, Cortex-R4, RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
- Download speed up to 1 MByte/second
- Supportsunlimited breakpointsin flash memory!1More info...
- Setting breakpoints inexternalflash memory of Cortex-M systems is possible with
smart-Link'sUnlimited Flash Breakpointstechnology only! - Supported by all major IDEsMore info...
- Free software updates2, 1 year of support
- Supports concurrent access to CPU by multiple applications3
- Crossplatform support (runs on Windows, Linux, Mac OS X)4
- Intelligence in the emulator firmwareMore info...
- Remote Server included. Allows using Smart-Link remotely via TCP/IPMore info...
- GDBServer includedMore info...
- Production flash programming software (J-Flash) availableMore info...
- Software Developer Kit (SDK) availableMore info...
- Supports multiple target interfaces: JTAG, SWD
- Supports SWV/SWO (Serial Wire Viewer / Serial wire output)
- Wide target voltage range: 1.2V - 3.3V, 5V tolerant
- Supports JTAG chains with multiple devices
- Embedded Trace Buffer (ETB) support
- Various target adapters available, including optical isolation adapter.More info...
- RDI interface DLL available.More info...
- Fully plug and play compatible
- No power supply required, powered through USB
- Support for adaptive clocking
- All JTAG signals can be monitored, target voltage can be measured
- Target power supply: Smart-Link can supply up to 300 mA to target with overload protection
| 選購商品 |  | | | |
