  | | |  | | | |
產品說明0 
注意事項 - 1.調試串口引腳定義: 3V電平,波特率1500000bps
- 2.插入電源後,需要按一下電源按鍵T4才會開機
- 3.當板子處於關機或睡眠狀態時,按一下電源按鍵,板子就會被喚醒
2021年新版NanoPC-T4 開發板，享受【散熱片免費升級為帶風扇的散熱片！】跟著賀工視頻學習嵌入式系統開發- RK3399啦！So easy! （圖為清單） 
套餐介紹 - 單板： NanoPC-T4單板主機1個；
- 入門套餐 (標配)： NanoPC-T4單板主機+T4散熱片+12V2A電源適配器+雙頻天線+亞克力支架；
- 無憂套餐：入門套餐+16GB高速TF卡+讀卡器+USB2UART調試工具+TypeC USB線；
屏幕介紹 支持Android和ubuntu系統； - 11.6吋eDP高清電容屏： 11.6英寸電容觸摸屏，1920x1080分辨率，eDP接口；（型號：K116E）
- 7吋eDP高清電容屏：7英寸電容觸摸屏，800x1280分辨率，eDP接口；（型號：HD702e）
開發板沒有自帶光盤，所有資料從以下鏈接獲取
WIKI: http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T4 機械結構圖（dxf格式）：http://wiki.friendlyarm.com/wiki/images/b/bc/NanoPC-T4_1802_Drawing%28dxf%29.zip 原理圖：http://wiki.friendlyarm.com/wiki/images/f/f4/NanoPC-T4-1802-Schematic.pdf 源代碼：https://github.com/friendlyarm 固件下載地址：https://pan.baidu.com/s/1rZmMQEQL1tu15R6IeYrksw#list/path
| Kernel version | Linux-4.4-LTS
U-boot-2014.10 | | OS Support | Android 8.1
Android 10
Lubuntu 16.04 (32-bit)
FriendlyCore 18.04 (64-bit)
FriendlyDesktop 18.04 (64-bit)
FriendlyWrt 21.02.1 (64-bit) |
使用Android7 FriendlyElec為NanoPC-T4提供完整的Android7.1 BSP 。源代碼託管在gitlab.com上，是開源的。BSP支持GPU和VPU硬件加速。 使用遠程控制導航Android NanoPC-T4支持Android下的FriendlyARM RC-100遙控器。為了獲得更好的體驗，您可以將T4連接到HDMI顯示器並導航Android。 這是一個遙控器鍵和相應功能的表： 
產品規格 （隨著支援系統陸續更新，如不確定可以發信詢問工程師） | Hardware Spec | | SoC | CPU: big.LITTLE，Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
GPU: Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenCL, DX11, and AFBC
VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc | | GPU: | Mali-T864 GPU，supports OpenGL® ES1.1/2.0/3.0/3.1, OpenCL™, DX11, and AFBC | | VPU | 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc | | DDR3 RAM: | Dual-Channel 4GB LPDDR3 | | Storage: | 16GB eMMC 5.1 Flash | | Network: | Native Gigabit Ethernet | | PMU Power Management: | RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, sofeware power-down, RTC wake-up, system sleep mode | | WiFi: | 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface | | Antenna Interface: | dual antenna interface | | Audio input/output Port | 3.5 mm audio jack / via HDMI,DVP Camera/MIPI-CSI (two camera interfaces),HDMI Type-A / LVDS / Parallel RGB-LCD / MIPI-DSI (four video output interfaces) | | Bluetooth: | Bluetooth 4.1,Wi-Fi and Bluetooth combo module, dual antenna interface | | Buttons | Power Button x1
Reset Button x1
MASKROM(BOOT) Button x1
Recovery x1 | | Microphone: | onboard Microphone | | LCD Interface: | one eDP 1.3（4 lane，10.8Gbps）, one 4-Lane MIPI-DSI | | HDMI: | HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2 | | GPIO: | 1 X 3V/1.8V I2C, up to 2 x 3V UART, 1 X 3V SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs
1 x 1.8V I2S, 3 x 1.8V GPIOs | | Serial Debug Port: | one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps | | LED: | 1 x power LED and 1 x GPIO Controlled LED | | RTC: | 2 Pin 1.27/1.25mm RTC battery input connector | | PCB Dimension: | 10 Layer, 100 mm x 64 mm | | Power: | DC 12V/2A | | Working temperature: | -20℃ to 70℃ | | Software Features | | Kernel version | Linux-4.4-LTS
U-boot-2014.10 | | OS Support | Android 8.1
Android 10
Lubuntu 16.04 (32-bit)
FriendlyCore 18.04 (64-bit)
FriendlyDesktop 18.04 (64-bit)
FriendlyWrt 21.02.1 (64-bit) | | | |
