產品說明4
MPLAB PICkit5 PG164150
MICROCHIP PICKit5 高品質 工包 仿真器 下載器 Debugger
MPLAB PICkit5（標配）燒錄器，PG164150 原裝 microchip開發板 下載器
The MPLAB® PICkit™ 5 in-circuit debugger/programmer enables quick prototyping and portable, production-ready programming for all Microchip devices, including PIC® microcontrollers (MCUs) and dsPIC® Digital Signal Controllers (DSCs), AVR® and SAM devices and Arm® Cortex®-based microprocessors (MPUs). It works alongside the MPLAB X Integrated Development Environment (IDE) to provide a powerful and easy-to-use Graphical User Interface (GUI) for debugging and programming. Alternatively, the MPLAB PICkit 5 in-circuit debugger/programmer can be used stand-alone with the MPLAB Programmer-to-Go (PTG) mobile app, allowing you to connect to the tool from your smartphone via Bluetooth®. With stand-alone programming features accessible from your smartphone, the MPLAB PICkit 5 in-circuit debugger/programmer is a versatile programming companion that lets you prototype and debug your solution and then unplug and bring the device with you to deploy that solution out in the field.
MPLAB® PICkit™ 5 在線調試器/編程器支持對所有Microchip 器件進行快速原型設計和便攜式、生產就緒型編程，包括PIC® 微控制器(MCU) 和dsPIC® 數字信號控制器(DSC)、AVR®和SAM 器件以及基於 Arm® Cortex® 的微處理器 (MPU)。它與 MPLAB X 集成開發環境 (IDE) 配合使用，為調試和編程提供功能強大且易於使用的圖形用戶界面 (GUI)。另外，MPLAB PICkit 5 在線調試器/編程器可以與 MPLAB Programmer-to-Go (PTG) 移動應用程序一起單獨使用，讓您可以通過藍牙® 從智能手機連接到該工具。通過智能手機可訪問的獨立編程功能。
The MPLAB PICkit 5 supports a wide variety of interfaces such as four-wire JTAG or Serial Wire Debug (SWD) with streaming UART Virtual Comm Port (VCP), and with the Debugger Adapter Board (AC102015) can use standard connectors for JTAG, SWD, ICSP, and AVR Protocols. With the unique programmer-to-go function, the PICkit 5 can also be powered by the target board and program a default image simply by pressing the button hidden under the logo. You can also connect via Bluetooth using the MPLAB PTG mobile app and browse the micro SDTM card installed in the tool for a different image and start programming the target board right from the app.
MPLAB PICkit 5 支持多種接口，例如帶流式 UART 虛擬通信端口 (VCP) 的四線 JTAG 或串行線調試 (SWD)，並且通過調試器適配器板 (AC102015) 可以使用用於 JTAG、SWD 的標準連接器、ICSP 和 AVR 協議。憑藉獨特的編程功能，PICkit 5 還可以由目標板供電，只需按下隱藏在徽標下方的按鈕即可編程默認映像。 您還可以使用 MPLAB PTG 移動應用程序通過藍牙進行連接，瀏覽工具中安裝的 micro SD TM卡以獲取不同的圖像，然後直接從應用程序開始對目標板進行編程。
Note: The PICKit 5 is compatible with MPLAB X IDE version 6.10 and later.
注：PICKit 5 與 MPLAB X IDE 版本 6.10 及更高版本兼容。立即下載。
- Improved Programmer-to-Go (PTG) support with the MPLAB PTG mobile app
改進了 MPLAB PTG 移動應用程序對 Go 編程 (PTG) 的支持
- Connect wirelessly from your smartphone via Bluetooth®
通過藍牙®從您的智能手機進行無線連接
- Select from multiple saved program images on the SD Card
從 SD 卡上保存的多個程序圖像中進行選擇
- Start programming from the app or by pressing on the logo
從應用程序或按徽標開始編程
- Supply 150 mA to the target
向目標提供 150 mA 電流
- Option to be self-powered from the target (2.7V to 5V)
可選擇由目標自供電（2.7V 至 5V）
- Simplify your workspace
簡化您的工作空間
- USB Type-C® connector and cable
USB Type-C® 連接器和電纜
- No external power needed when the device is powered by high-speed USB 2.0
當設備由高速 USB 2.0 供電時，無需外部電源
- Use the eight-pin single in-line header
使用八針單列直插接頭
- Supports JTAG, SWD, UART VCP
支持JTAG、SWD、UART VCP
- Adapter board allows use of standard connectors for JTAG, SWD, ICSP, and AVR Protocols
適配器板允許使用 JTAG、SWD、ICSP 和 AVR 協議的標準連接器
- Reduce Costs
減少開支
- Features and performance at a fraction of the cost of comparable debuggers/programmers
其功能和性能只是同類調試器/編程器成本的一小部分
